Paint seal GYEON Q² One EVO 30 ml
Paint seal GYEON Q² One EVO 30 ml
Paint seal GYEON Q² One EVO 30 ml

Paint seal GYEON Q² One EVO 30 ml

Regular price €53,00
Unit price  per 
Tax included. Shipping calculated at checkout.

Paint seal GYEON Q² One EVO 30 ml


After two years of intensive research and development, it was time to boost the Gyeon coating spectrum to a new level: through technological advances in the chemical group of polysilazanes, Gyeon has succeeded in almost doubling the service life as well as that To drastically simplify application behavior once again: the application or removal window has been extended enormously with the new recipes.

What's more: all new coatings in the EVO version no longer require a 2-layer application, but only a single layer, and what's more, they can even be applied outside in the fresh air; a garage is no longer a mandatory requirement for this. The only thing to ensure is a dry spot for the next 12 hours and some shade for the application.

Q² One EVO is the entry-level silicon-based coating from Gyeon. It is ideally suited for price-conscious users who are looking for maximum performance with the most efficient use of resources possible.

Like its bigger brother Q² Pure EVO, the Q² One EVO creates an impressive candy effect and, in view of its service life, is a modern competitor to high-quality natural waxes. The fantastic color depth is accompanied by a durable and highly chemical-resistant protection against all kinds of environmental influences, which guarantees quick and easy cleaning of your vehicle.

  • Service life: up to 24 months or 25tkm
  • Consumption: 30 ml/vehicle

Scope of delivery:

  • 1pc GYEON Q² One EVO 30ml
  • 1 piece GYEON Q²M Cure 100ml
  • 1 piece GYEON Q²M Coating Applicator
  • 1 piece GYEON instruction manual

Delivery quantity: 30ml

Fits: Tesla Model 3/Y

Processing Notes:

The better the surface is prepared, the better the result in terms of gloss, service life and beading effect.

  • Thorough prewash and decontamination with Q²M Foam, Q²M Tar, Q²M Iron, Q²M Clay
  • Polish all painted surfaces to a high gloss with Q²M Polish and if necessary Q² Primer
  • Wash the vehicle with a strong degreasing detergent, e.g. dishwashing liquid and hot water
  • Remove all dirt, wax and oily polish residues with Q²M Prep (IPA alone is not enough)
  • Shake the bottle, put a few drops of Q² One EVO on the applicator
  • Apply crosswise until the layer is full and even, always only working on smaller areas
  • After 10-30 seconds, polish off excess with a fresh Q²M microfibre cloth BaldWipe and achieve an even finish
  • After 1 hour apply the Q²M Cure spray as a topping and with Q²MSoftWipe wipe to protect against any water stains
  • Avoid water during the drying time (24 hours), do not wash with car shampoo during the hardening phase (14 days)

Difficulty: Easy



Sold Out